sigma omega profile roll former promotion goods

  Product Description »»» UNOVO Machine Information: Warehouse storage rack Roll Forming Machine,   This machine use to produce metal stroage rack, from a coil to finished finished storage rack product only finished by one production line, the machine line has 3in1 equipment which has de-coiler for coil hold, leveling machine for making coil sheet flat, and then use servo feeder to feed sheet length to punching machine as PLC program setting, hydraulic punching machine has several individual cyliner which could be seperately controlled by PLC, so it's easy to achieve punching any hole or slot or notching at any length side of sheet. After finish holes punching on sheet, then do length cut-off, and then use automatic convey belt to transfer the sheet to roll forming machine. Roll forming machine will forming the door frame profile as the drawing requirement step by step. After profile forming there has straightening device for adjusting the straightness of finished door frame. And then product comes out of roll forming machine to stand tables ready for packing.    It is full automatic machine line and quite easy to use it, only require 3 people for operation.     »»» Product Information:

Profile Drawing
Tolerance	Profile Section:	±0.5mm
	Cutting Length:	±1.0mm
	Hole Distance	±0.1mm
	Straightness:	1.0mm/M
	Twist:	1.0mm/M
	Bend:	1.0mm/M
Material Info	Type:	Cold Roll Steel Galvanized Steel
	Thickness:	0.8mm~1.2mm
	Yield Strength	195Mpa
	Maximum Width	<350mm

»»» UNOVO Machine Layout: »»» UNOVO Machine Components:

1.	3in1 Machine [De-coiler+Leveling+Servo Feeder]	1 set
2.	Hydraulic Punching Machine	1 set
3.	Roll Forming Machine	1 set
4.	Back Punching Machine [for lock hole]	1 set
5.	Automatic Convey Belt	1 set
6.	Hydraulic Station	2 sets
7.	Computer Control Box	2 sets
8.	Product Stand Tables	2 sets
9.	Punching Molds	5 units
10.	Tool Box	1 box

  UNOVO Machine Infor »»» UNOVO Machine Specification:

3in1 machine	Coil ID:	508mm
	Coil OD:	1200mm
	Coil weight:	2tons
	Voltage:	380V AC 50HZ
	Maximum Speed:	16m/min
	Feeding precision:	±0.1mm
	Straighten Roll:	Upper5/Lower4
	Feeding Roll:	upper 1/lower 1
	Expansion type:	Hydraulic
Punching Machine	Design Technology:	From Australia JD Machinery
	Structure:	4 Columns
	Mold Material:	Cr12Mov
	Mold Treatment:	Heat treatment, HRC58~62o.
	Cylinder:	Indivicual Seperately Move Function
	Control System:	PLC control

Automatic Convey Belt is used to transfer the steel sheet which had finished punching hole and length cut-off to roller former machine for profile section forming. It is drived by SIEMENS Motor and roll and belt. Structure frame is C section steel and squre tube welded together. The electric wire line is collected in cable tray box.  

Computr Control Box	PLC Brand:	Japan Mitsubishi
	Frequency Inverter:	America Emerson
	Electrical Part:	LS / Schneider
	Servo Drive:	Japan Yaskawa
	Touch Screen Brand:	MCGS
	Touch Screen Size:	10 inch
	Aviation Plug, Emergency Stop Button, Air Fan, Remote Control

Hydraulic Station	Motor:	Taiwan Hegu
	Pump:	Taiwan Hegu
	Solenoid Valve:	Taiwan Yuken
	Air Fan:	Taiwan Risen
	Imported From Taiwan

Machine Details View: Z�W�f؈��W�M�1�ƨ#3

Product Categories : Roll Forming Machine > Sigma Section Forming Machine